Washing Tips

Washing Tips

Suggested wash cycles (wand-wash)




  1. Soap
  2. Rinse
  3. Wax
  4. Spot Free
  1. Presoak
  2. Soap
  3. Foam Brush
  4. Rinse
  5. Wax
  6. Spot Free
  1. Presoak
  2. Engine / Tire
  3. Soap
  4. Foam Brush
  5. Rinse
  6. Foam Conditioner
  7. Wax
  8. Spot Free

 Highly recommend wax / foam conditioner use every wash to protect finish between washes

Presoak Product: Highly concentrated cleaner & degreaser
Purpose: Softens & loosens road film
Process: Low pressure, sheet vehicle from bottom up
Engine / tire Product: Highly concentrated cleaner & degreaser
Purpose: Softens & loosens non water soluble agents
Process: Low pressure, sheet engine &? tires
Soap Product: Ultra concentrated detergent
Purpose: Removal of road film & loosens grime
Process: High pressure, wash vehicle from bottom up
Foam brush  Product: High foaming detergent
Purpose: Lubricant during brushing which loosens baked on road film
ProcessApply to wet vehicle using high qualit hogs-hair brush
Rinse Product: Heated & softened rinse water
Purpose: Remove soap residue or foam conditioner from vehicle
Process: High pressure, rinse thoroughly from top down
Foam conditioner  Product:  Foam Conditioner
Purpose: Water repellent barrier, rust inhibitor & U.V. protection enhances gloss, conditions vinyl & rubber
Process: Spray vehicle from top down
Clear coat / wax  Product: Clear coat
Purpose: Protective barrier between paint & road contaminants
Enhances gloss
Process: High pressure, spray vehicle from top down
Spot free Product: Softened mineral free rinse water
Purpose: Final rinse, reduces spotting
Process: Low pressure, rinse vehicle from top down
Air nozzle Product: Pressurized air
Purpose: Drying vehicle, preventing frozen doors and locks in winter
Process: Dry vehicle from top down
Tire Dressing Product: Cleaner Protector
Purpose: Brings back the “Like New Look”
Process:  USE FIRST, then wash normally.
Vacuum for dry use only


Post a Comment

You must be logged in to post a comment.